How to set up a travel eSIM on iPhone, step by step

Install a travel eSIM on iPhone at home on Wi-Fi, answer the four setup questions so your own number keeps working, then switch on three settings when you land.

Updated 7 sources

The Vasco da Gama Bridge across the Tagus estuary in Lisbon at sunrise, with mist on calm water.

In short

  • Any unlocked iPhone XS, XS Max, XR or later takes an eSIM. Check under Settings, General, About that Carrier Lock says No SIM restrictions.
  • Install the travel eSIM at home on Wi-Fi, from Settings, Mobile Service (Cellular in the US), Add eSIM, then Use QR Code.
  • Answer the setup questions like this: Default Line and iMessage & FaceTime on your own number, Mobile Data on your own line for now, Allow Mobile Data Switching off.
  • When you land, turn Data Roaming on for the travel line, set Mobile Data to the travel line, and check mobile data switching is still off.
  • After the trip, turn the line off rather than deleting it. An erased eSIM cannot be reinstalled from the same code.
Contents 12 sections
  1. Before you start: does your iPhone support eSIM, and is it unlocked?
  2. When to install: before you leave, on Wi-Fi
  3. How to add a travel eSIM on iPhone
  4. The four setup questions, and the right answers for a trip
  5. What your iPhone shows after install (and why it is not wrong)
  6. When you land: the three switches to flip
  7. Why does my eSIM say “Activating” or show no data?
  8. “Choose a cellular plan to turn off”: what to do
  9. Can an iPhone hold two or more eSIMs? How dual SIM works abroad
  10. After the trip: keep the eSIM, don’t delete it
  11. Questions
  12. Sources

To activate a travel eSIM on iPhone, install it at home on Wi-Fi from Settings, Mobile Service, Add eSIM, then Use QR Code, and keep your own number as the default line with mobile data switching turned off. When you land, turn Data Roaming on for the travel line and set Mobile Data to it. That is the whole job; the rest of this page explains each step and what your iPhone will show along the way.

The steps come in two halves: the install, done before you leave, and the switch-over, done on arrival. Most problems people have abroad come from skipping one setting in the second half.

Before you start: does your iPhone support eSIM, and is it unlocked?

Apple lists the iPhone XS, iPhone XS Max and iPhone XR as the first models with eSIM, and every iPhone since has it. The quickest check is your own phone: if Settings, Mobile Service offers Add eSIM, it supports one. Our device compatibility page lists models by manufacturer.

Some iPhones have no SIM tray at all. Apple sells the iPhone 14, 15 and 16 families bought in the United States as eSIM-only, and the iPhone 17 family, iPhone 17e and iPhone 18 Pro models as eSIM-only in more countries, including Canada, Mexico, Japan and the UAE. The iPhone Air is eSIM-only wherever it is sold. For travelling, that changes nothing: an eSIM-only iPhone takes a travel eSIM the same way.

The other condition is the carrier lock. A phone locked to your home network will not accept another company’s eSIM. Go to Settings, General, About and look at Carrier Lock. Apple says that if it reads “No SIM restrictions”, the iPhone is unlocked. If it says anything else, only your carrier can unlock it, so ask them well before you travel. Phones and eSIM covers compatibility and locks in more detail.

When to install: before you leave, on Wi-Fi

Install the eSIM a day or two before you fly, at home or anywhere with steady Wi-Fi. Apple says the iPhone has to be connected to Wi-Fi or a hotspot to download a travel eSIM, and that is the one thing you will not have when you land.

Installing early is safe with a travel eSIM whose days start on first use at the destination. SimbaSIM’s work that way: the days start when you land and first use the data, not when you buy or install, so an eSIM that sits on your phone for a week costs nothing. Check the terms of any other provider before you install too far ahead.

How to add a travel eSIM on iPhone

You will have received one of three things: a QR code, an install link, or a pair of codes to type in. Any of them gets you to the same place.

With a QR code

  1. Open the email with the QR code on a laptop, a tablet or another phone, or print it.
  2. On your iPhone, go to Settings, then Mobile Service (Cellular in the US; some iOS versions say Mobile Data).
  3. Tap Add eSIM, then Use QR Code, and point the camera at the code.
  4. Tap Continue when the plan appears, and wait for it to finish.

Scanning a code shown on another screen is the normal, supported way to do this. Apple also lets you open the Camera app and scan the code directly, then tap the notification that a mobile plan was detected.

If the QR code is on the iPhone you are installing to, you cannot point that phone’s camera at it. On iOS 17.4 or later, Apple’s way round this is to touch and hold the QR code in the email and tap Add eSIM.

On iOS 17.4 or later, an install link sets up the eSIM in one tap. Tap it on the iPhone, tap Allow when Activate New eSIM appears, then tap Continue. The link only works when you open it on the iPhone itself. Clicked on a computer, it shows an error in the browser and installs nothing; scan the QR code instead.

By typing the details

If neither works, go to Settings, Mobile Service, Add eSIM, then Enter Details Manually at the bottom of the screen, and type in the address and activation code from your email.

The four setup questions, and the right answers for a trip

Straight after the download, your iPhone asks how to share the work between your own line and the new one. These answers keep your number working and keep your home carrier’s roaming charges off your bill.

  1. Default Line: your own number. Calls and texts carry on as normal, including the security codes your bank sends. A data-only travel eSIM has no number to call.
  2. iMessage & FaceTime: your own number. People see the number they already have for you. Both apps run over data, so they work on the travel line anyway.
  3. Mobile Data: your own line, for now. The travel plan only works at your destination, so choosing it at home gives you a line with nothing behind it. You switch over when you land.
  4. Allow Mobile Data Switching: off. Apple describes this setting as letting the iPhone use mobile data from both plans depending on coverage. Abroad, that means it can move your data back onto your home line, at your home carrier’s roaming rate, whenever it judges the signal better there. Keep it off for the trip.

Nothing here is permanent. You can change every answer later under Settings, Mobile Service.

What your iPhone shows after install (and why it is not wrong)

A travel eSIM rarely announces itself by the name of the shop you bought it from, which worries people. What you are likely to see:

  • During install, the profile may show a network name you did not expect. Ours may appear as “Plus”, the network SimbaSIM’s eSIMs are registered on. That is correct.
  • After install, the new line is unnamed, labelled something like “Mobile Data” or “Secondary”. It does not say the destination.
  • After landing, the status bar shows the local network’s name, because those are the towers you are using.

Rename the line now so you can find it on arrival. Go to Settings, Mobile Service, tap the new line, then tap the plan label and give it the country’s name. If you cannot tell which line is which, the one with your number is the one your calls and texts arrive on; a line you do not recognise is the travel eSIM.

When you land: the three switches to flip

Take the phone off Airplane Mode, give it a minute, then go to Settings, Mobile Service:

  1. Turn Data Roaming on for the travel line. Tap the travel line and turn on Data Roaming. A travel eSIM connects as a visiting plan on a local network, so to your iPhone it is roaming, and with this off it will not connect. Apple sets Data Roaming line by line, so turning it on for the travel line adds nothing to your home bill. Leave it off on your own line.
  2. Set Mobile Data to the travel line. Tap Mobile Data and choose the travel line. Apple’s iPhones use one line for data at a time.
  3. Check Allow Mobile Data Switching is still off. It sits under the same Mobile Data screen.

Your own number stays on for calls and texts. With a SimbaSIM plan, this is also the moment the days start.

Why does my eSIM say “Activating” or show no data?

A line stuck on “Activating” or “No Service” after landing almost always has Data Roaming turned off. Turn it on for the travel line first, every time. Also check that you have actually arrived: a travel plan registers at its destination, not at home.

If the line has signal but nothing loads, Mobile Data is probably still set to your home line, or mobile data switching has handed it back. Fix both as above. If it still will not connect, turn Airplane Mode on for a few seconds and off again so the phone searches afresh. eSIM troubleshooting goes through the remaining fixes in order.

“Choose a cellular plan to turn off”: what to do

This message means the eSIM installed correctly. An iPhone keeps two lines active at a time, and you already had two, perhaps an old eSIM from a previous trip or a second work line. Keep the line with your own number on, and turn off the other old line for the trip so the travel eSIM can be active. Turning a line off deletes nothing; you can switch it back on whenever you like.

Can an iPhone hold two or more eSIMs? How dual SIM works abroad

Yes. Apple says an iPhone can manage eight or more eSIMs, but only two lines are active at once, and only one carries mobile data.

  • iPhone XS, XR, 11 and 12 run a physical SIM and one eSIM at the same time. With your own number on the physical SIM, the travel eSIM is the second line.
  • iPhone 13 and later can also run two eSIMs at once, according to Apple. That is how an eSIM-only iPhone keeps your own eSIM number on while the travel eSIM carries data.

Abroad, the two active lines divide the work: your own line for calls and texts, the travel line for data. Messaging apps that run over data, such as WhatsApp and iMessage, keep working under your usual account.

After the trip: keep the eSIM, don’t delete it

When you get home, go to Settings, Mobile Service, set Mobile Data back to your own line, then tap the travel line and turn it off. Do not delete it.

Apple says that once you erase an eSIM, you need a new one from the provider, because the activation code is spent by the first download. With SimbaSIM there is a second reason to keep it: the eSIM stays on your phone between trips at no charge, and the next plan you buy goes onto the same eSIM, with nothing new to install. Before your next trip, turn the line back on and pick up from the landing steps above. The install guide has the same steps for Android, and What is a travel eSIM? explains how the plan itself works.

Questions

Can I scan the eSIM QR code from a laptop screen?

Yes. Opening the email on a laptop or another phone and scanning the code with your iPhone is the normal way to install a travel eSIM. On iOS 17.4 or later you can also touch and hold a QR code shown in an email on the iPhone itself and tap Add eSIM.

Do I need Wi-Fi to install an eSIM on iPhone?

Yes, in practice. Apple says the iPhone must be connected to Wi-Fi or a hotspot to download a travel eSIM, which is why you install it before you leave rather than after you land.

Will installing the eSIM early use up my plan?

Not with a plan whose days start on first use at the destination. SimbaSIM plans start when you land and first use the data, so installing a week early costs nothing.

Does a travel eSIM give my iPhone a new phone number?

Most travel eSIMs, SimbaSIM’s included, carry data only and have no number. Your own number stays on your own line for calls and texts, and app calls such as FaceTime and WhatsApp work over the travel data.

How do I rename the eSIM line on my iPhone?

Go to Settings, Mobile Service, tap the line, then tap the plan label and choose or type a name, such as the country you are visiting.

Sources

  1. Set up eSIM on iPhone (Apple Support UK)support.apple.com
  2. Using Dual SIM with an eSIM (Apple Support)support.apple.com
  3. Learn which type of SIM your iPhone or iPad uses (Apple Support)support.apple.com
  4. How to unlock your iPhone for use with a different carrier (Apple Support)support.apple.com
  5. About mobile data roaming options for your iPhone and iPad (Apple Support UK)support.apple.com
  6. Use eSIM while traveling internationally with your iPhone (Apple Support)support.apple.com
  7. How to erase an eSIM on your iPhone or iPad (Apple Support)support.apple.com

Checked against these sources on 1 November 2026. Seen something out of date? Tell us at support@simbasim.com.

Ready for your next trip?

Get your eSIM in 60 seconds. Truly unlimited data, starting when you first connect at your destination.

Simba the bear at a hilltop above the clouds at sunrise

130+ destinations

3 days

unlimited data
From$12.90
Choose destination

One payment. No subscription.

  • Hotspot included
  • 24/7 support

Won’t install or connect?

Your refund guarantee

  • 100% refund if your eSIM won’t install.
  • 100% refund if it never connects at your destination.
  • 100% refund or a swap if you picked the wrong destination and haven’t connected.
  • 100% refund for a confirmed fault on our side or the network’s that stops your eSIM working.

Used part of your plan? Unused days are refunded pro rata within 30 days of purchase, while the plan is still valid.

Request a refund within 30 days. Email your order reference and what happened to support@simbasim.com. Approved refunds return to your original payment method, usually within 5–10 business days.

Expired plans and deleted eSIM profiles aren’t refundable. Other policy exclusions apply. Full refund policy (opens in a new tab)