How to set up a travel eSIM on Samsung, Pixel and Android

Add a travel eSIM on a Samsung Galaxy or Google Pixel at home on Wi-Fi, choose which SIM does what, then turn on roaming and switch data over when you land.

Updated 9 sources

Sugarloaf Mountain across Botafogo Bay in Rio de Janeiro at dawn, with sailing boats moored on calm water.

In short

  • Samsung Galaxy: Settings, Connections, SIM manager, Add eSIM, then scan the QR code. Older One UI versions call it SIM card manager and Add mobile plan.
  • Google Pixel and stock Android: Settings, Network & internet, SIMs, Add SIM, Set up an eSIM, then scan the QR code.
  • Install at home on Wi-Fi, scanning the code from a laptop or another phone. The one-tap install link in the email is for iPhone and does nothing on Android or a computer.
  • Keep your own SIM for calls and texts and for mobile data until you land. Turn off Data switching (Samsung) or Automatic data switching (Pixel) for the trip.
  • When you land, turn Data roaming on for the travel eSIM and set it as the SIM for mobile data.
  • After the trip, switch the eSIM off rather than removing it. The activation code works once, so a removed eSIM cannot be put back from the same email.
Contents 14 sections
  1. Can my Android phone use an eSIM?
  2. Before you start: Wi-Fi, a second screen, and install before you fly
  3. How to add an eSIM on a Samsung Galaxy, step by step
  4. How to add an eSIM on a Google Pixel and other stock Android phones
  5. No QR scanner? Entering the activation code by hand
  6. Which SIM for calls, texts and mobile data: the settings to choose
  7. When you land: turn on data roaming and switch mobile data to the eSIM
  8. Turn off automatic data switching so your home carrier doesn’t bill roaming
  9. What you’ll see that looks wrong but isn’t
  10. Rename the line so you can find it again
  11. It says connected but there’s no data: the three checks
  12. Can I delete the eSIM after the trip?
  13. Questions
  14. Sources

To activate a travel eSIM on a Samsung Galaxy, go to Settings, Connections, SIM manager, tap Add eSIM and scan the QR code, at home on Wi-Fi. On a Google Pixel or other stock Android phone the path is Settings, Network & internet, SIMs, Add SIM, Set up an eSIM. When you land, turn on Data roaming for the travel eSIM and make it the SIM for mobile data, with your own SIM kept for calls and texts.

The job comes in two halves: the install, done before you leave, and the switch-over, done on arrival. Most problems people have abroad come from one setting in the second half, so this page goes past the QR code to the settings that decide whether it works when you land.

Can my Android phone use an eSIM?

The quickest check is the phone itself. On a Samsung, open Settings, Connections, SIM manager and look for Add eSIM (or Add mobile plan on older software). On a Pixel, open Settings, Network & internet, SIMs, then Add SIM, and look for Set up an eSIM. If the option is there, the phone takes an eSIM.

Two more checks help if you are unsure:

  • The EID. Every eSIM phone has an EID, a long number that identifies its eSIM chip. Samsung says you will find it on the box or under Settings, About phone, Status. Dialling *#06# in the Phone app on most eSIM phones shows the EID beside the IMEI. No EID means no eSIM.
  • The model list. Google says every Pixel from the 3a onwards takes one physical SIM and one eSIM, and the Pixel 7 and later can run two eSIMs at once where the carrier allows. Samsung’s flagship S and Z series have eSIM, but only some Galaxy A-series models do, and it can differ by country, so two phones with the same name can behave differently. Our device compatibility page lists models by manufacturer.

Is the phone locked to your carrier?

A phone bought on a payment plan from a carrier, especially in the US, may be locked to that carrier. A locked phone treats a travel eSIM like any other company’s SIM: the QR scan fails, or the eSIM installs as a line but never connects. Check before you buy, because an unlock can take days. How to check if your phone is unlocked has the check for Samsung, Pixel and other Android phones.

Before you start: Wi-Fi, a second screen, and install before you fly

  • Wi-Fi. Samsung says to connect to Wi-Fi or mobile data before you add a plan. The eSIM downloads over the internet, and Wi-Fi is the one thing you may not have when you land.
  • The QR code on another screen. Open the email with the QR code on a laptop, a tablet or someone else’s phone, or print it. Scanning it with your Android phone is the normal, supported way to install.
  • A day or two before you fly. Installing early is safe with a plan whose days start on first use at the destination. SimbaSIM’s work that way: the days start when you land and first use the data, not when you install.

The email may also carry a one-tap install link. That link is for iPhone (iOS 17.4 or later), opened on the iPhone itself. Clicked on a computer, the browser cannot open it and shows an error such as “ERR_UNKNOWN_URL_SCHEME”; nothing is wrong with the eSIM. On Android, ignore the link and scan the QR code.

How to add an eSIM on a Samsung Galaxy, step by step

These are the steps on current One UI versions, from Samsung’s US support page:

  1. Open Settings and tap Connections.
  2. Tap SIM manager.
  3. Tap Add eSIM.
  4. Choose Scan QR code (some versions say Scan QR code from service provider) and point the camera at the code.
  5. Confirm when the plan appears, and wait for the download to finish.
  6. Restart the phone if it asks you to; Samsung’s steps end with a restart.

On older Galaxy software, Samsung’s UK page gives the same route under different names: Settings, Connections, SIM card manager, Add mobile plan, then Add using QR code.

Samsung lets you search Settings too. If your menus look different, search for “eSIM” or “SIM manager”.

How to add an eSIM on a Google Pixel and other stock Android phones

Google’s steps for a Pixel that is already set up:

  1. Open Settings and tap Network & internet.
  2. Tap SIMs, then Add SIM.
  3. Tap Set up an eSIM.
  4. Scan the QR code when the camera opens.
  5. Tap Set up and follow the instructions on the screen.

When the phone asks about SIM preferences, use the answers in the section below. Other Android phones follow a similar route, but menu names vary by maker and version; if you cannot find it, search Settings for “eSIM” or “SIM”.

No QR scanner? Entering the activation code by hand

If the camera will not read the code, you can type in the address and activation code from your email instead.

  • Samsung, older software: SIM card manager, Add mobile plan, then Add using activation code, and type the details in.
  • Pixel: on the scanning screen, AT&T’s Pixel guide says to tap Try these troubleshooting steps, then Enter activation code.

Type it exactly as it appears in the email. If your Samsung’s current software offers no manual option, scan the code from a printout or a larger screen instead.

Which SIM for calls, texts and mobile data: the settings to choose

Straight after the download, or later in SIM manager (Samsung) or Network & internet, SIMs (Pixel), you choose which SIM does what. For a trip:

  1. Calls: your own SIM. People can still ring your number, and a data-only travel eSIM has no number to call from.
  2. Texts: your own SIM. The security codes your bank sends keep arriving.
  3. Mobile data: your own SIM, for now. The travel plan only works at your destination, so choosing it at home gives you a line with nothing behind it. You switch over when you land.

On a Samsung these sit under SIM manager, Primary SIM, where Samsung says you set the default for calls, texts and data. On a Pixel they sit under Your primary SIMs on the SIMs screen. Google notes that only one SIM can be the default for data.

When you land: turn on data roaming and switch mobile data to the eSIM

Take the phone off Airplane mode, give it a minute, then:

  1. Turn Data roaming on for the travel eSIM. A travel eSIM connects as a visiting plan on a local network, so to your phone it is roaming, and with roaming off it will not connect.
    • Samsung: Settings, Connections, Mobile networks, then the Data roaming switch. With two SIMs, make sure you are changing the travel eSIM’s setting, not your own SIM’s.
    • Pixel: Settings, Network & internet, SIMs, tap the travel eSIM, then turn on Roaming.
  2. Leave roaming off on your own SIM. Roaming is set SIM by SIM, so turning it on for the travel eSIM adds nothing to your home bill.
  3. Set mobile data to the travel eSIM. Samsung: SIM manager, Primary SIM, Mobile data. Pixel: SIMs, Your primary SIMs, Mobile data.

If the Data roaming switch on a Samsung is greyed out, Samsung says to check that mobile data is turned on. Your own SIM stays on for calls and texts. With a SimbaSIM plan, this is also when the days start.

Turn off automatic data switching so your home carrier doesn’t bill roaming

Both Samsung and Pixel have a setting that lets the phone use the other SIM for data when it judges the signal better there. AT&T describes Samsung’s version as switching between mobile networks “to maintain the best coverage and connectivity possible”. At home that is handy. Abroad, it can hand your data back to your own SIM, at your home carrier’s roaming rate.

  • Samsung: Settings, Connections, SIM manager, then turn Data switching off. Older software calls it Auto data switching.
  • Pixel: Settings, Network & internet, SIMs, then turn Automatic data switching off.

Turn it off before you fly and leave it off for the trip.

What you’ll see that looks wrong but isn’t

A travel eSIM rarely shows the name of the shop you bought it from, which worries people. What you are likely to see:

  • During install, the profile may show a network name you did not expect. Ours may appear as “Plus”, the network SimbaSIM’s eSIMs are registered on. That is correct.
  • After install, the new line may have a generic or unfamiliar name. It does not say the destination.
  • After landing, the status bar shows the local network’s name, because those are the towers you are using.

If you cannot tell which line is which, the one with your number is the one your calls and texts arrive on; the line you do not recognise is the travel eSIM.

Rename the line so you can find it again

Give the travel eSIM a name now and you will find it in seconds on arrival, and again on your next trip. On a Samsung, Verizon’s steps are: Settings, Connections, SIM manager, tap the SIM, tap Name, type a name such as the country, and tap Done. You can also pick an icon.

It says connected but there’s no data: the three checks

Signal bars with nothing loading almost always comes down to one of three settings. Check them in this order:

  1. Data roaming is off on the travel eSIM. Turn it on, as above. This is the cause far more often than anything else.
  2. Mobile data still points at your own SIM. Set the travel eSIM as the SIM for mobile data.
  3. Data switching has moved data back. Turn off Data switching (Samsung) or Automatic data switching (Pixel).

Also check you have actually arrived: a travel plan registers at its destination, not at home. If all three are right and it still will not load, turn Airplane mode on for a few seconds and off again so the phone searches afresh. eSIM stuck on activating or no data and eSIM troubleshooting go through the remaining fixes in order.

Can I delete the eSIM after the trip?

Don’t. Switch it off instead. On a Samsung, use the switch beside the eSIM in SIM manager; on a Pixel, open Network & internet, tap the eSIM and turn off Use this SIM. Then set mobile data back to your own SIM.

Removing it (Remove on a Samsung, Erase eSIM on a Pixel) is a different thing. The activation code is used up by the first download, so a removed eSIM cannot be put back from the same QR code or email; you would need a replacement profile from support. With SimbaSIM there is a second reason to keep it: the eSIM stays on your phone between trips at no charge, and the next plan you buy goes onto the same eSIM, with nothing new to install.

Before your next trip, switch the line back on and pick up from the landing steps above. Using an iPhone as well? The iPhone setup guide has the same steps for iOS, and the phones and eSIM hub explains how two lines share a phone. The install guide has a one-page version of both.

Questions

Do I need Wi-Fi to add an eSIM on Android?

Yes, or a working mobile data connection. Samsung says to connect the phone to Wi-Fi or mobile data before you add a plan, because the eSIM is downloaded over the internet. That is why you install it at home rather than after you land.

Will installing the eSIM early use up my plan?

Not with a plan whose days start on first use at the destination. SimbaSIM plans start when you land and first use the data, so installing a week early costs nothing.

Does a travel eSIM give my Samsung or Pixel a new phone number?

Most travel eSIMs, SimbaSIM’s included, carry data only and have no number. Your own number stays on your own SIM for calls and texts, and WhatsApp and other app calls work over the travel data.

Can I use the travel eSIM as a hotspot for my laptop?

With SimbaSIM, yes. Hotspot and tethering are included, so once mobile data is on the travel line you can share it from the phone’s Hotspot setting.

Where is SIM manager on my Samsung?

Settings, then Connections, then SIM manager. On older One UI versions it is called SIM card manager. If you cannot see it, search Settings for “SIM”.

Sources

  1. SIM cards for your Galaxy phone or tablet (Samsung US)samsung.com
  2. How to use an eSIM with your Galaxy phone (Samsung UK)samsung.com
  3. How do I turn international data roaming on or off on my Samsung Galaxy device? (Samsung UK)samsung.com
  4. Set up a new eSIM (Pixel Phone Help)support.google.com
  5. How to use dual SIMs on your Google Pixel phone (Pixel Phone Help)support.google.com
  6. Setting up an eSIM using a QR code or activation code, Google Pixel 10 Pro (AT&T Device Support)att.com
  7. Automatically switching mobile data between two SIMs, Samsung Galaxy S26 (AT&T Device Support)att.com
  8. Samsung devices, Dual SIM Dual Standby: rename SIM line (Verizon)verizon.com
  9. Google Pixel 10: turning data roaming on or off (EE)deviceguides.ee.co.uk

Checked against these sources on 4 November 2026. Seen something out of date? Tell us at support@simbasim.com.

Ready for your next trip?

Get your eSIM in 60 seconds. Truly unlimited data, starting when you first connect at your destination.

Simba the bear at a hilltop above the clouds at sunrise

130+ destinations

3 days

unlimited data
From$12.90
Choose destination

One payment. No subscription.

  • Hotspot included
  • 24/7 support

Won’t install or connect?

Your refund guarantee

  • 100% refund if your eSIM won’t install.
  • 100% refund if it never connects at your destination.
  • 100% refund or a swap if you picked the wrong destination and haven’t connected.
  • 100% refund for a confirmed fault on our side or the network’s that stops your eSIM working.

Used part of your plan? Unused days are refunded pro rata within 30 days of purchase, while the plan is still valid.

Request a refund within 30 days. Email your order reference and what happened to support@simbasim.com. Approved refunds return to your original payment method, usually within 5–10 business days.

Expired plans and deleted eSIM profiles aren’t refundable. Other policy exclusions apply. Full refund policy (opens in a new tab)