Travel eSIM shows signal but no internet: how to fix it
Your travel eSIM shows a local network and bars, but nothing loads. Check which line carries data, the network it is on, and 4G, on iPhone, Samsung and Pixel.

In short
- Bars and a local network’s name mean the eSIM is on a network. If nothing loads, a setting or the network choice is the cause, not the eSIM.
- Make sure Mobile Data points at the travel line and Data Roaming is on for it. Turn off Allow Mobile Data Switching on iPhone.
- If the phone sits on a network the plan cannot use, or shows only E or 2G, turn off automatic network selection and pick a network from the plan’s list.
- After a border, turn Airplane Mode on and off, and switch network selection back to Automatic if you set it by hand.
- Low Data Mode, Data Saver, a VPN or an app’s own mobile data switch can block data on a line that is working.
- Still stuck on Activating? That is a different problem with its own guide.
Contents 11 sections
- First: is your eSIM stuck on Activating, or does it show a network name and bars?
- Which line is your travel eSIM?
- Is your data going out on the right line?
- Is the phone on a network your plan can use?
- Bars but only “E” or 2G: forcing 4G or 5G
- No data after crossing a border
- Settings on the phone that block data
- Slow rather than dead
- When to stop and contact us
- Questions
- Sources
If your travel eSIM shows a local network’s name and signal bars but nothing loads, the eSIM is on a network and something is stopping the data. Check, in this order, that Mobile Data points at the travel line, that Data Roaming is on for it, and that the phone is on a network the plan can use, picked by hand if need be. If it shows only “E” or “2G”, choose another network or turn on 4G.
The steps for iPhone, Samsung Galaxy and Google Pixel sit side by side under each check. Menu names change a little between software versions; on iPhone, Mobile Service is called Cellular in the US.
First: is your eSIM stuck on Activating, or does it show a network name and bars?
Look at the travel line, not your own, and match what you see:
- “Activating”: the line has never registered on a network. This page is not for you yet. Go to eSIM stuck on Activating, which starts with the one setting that causes it.
- A local network’s name and bars, but no internet: the line is registered. Work down this page.
- “No Service”, “Searching” or “SOS” on the travel line: the line is not connected to a network. Apple says “SOS” means emergency calls can still go through other networks, and shows it in Australia, Canada and the US. Check Data Roaming is on for the travel line, then go to the section on choosing a network by hand.
- Bars, and pages load slowly: the eSIM is working. Skip to the section on slow data.
Why the status bar shows a local name and not the seller’s
A travel eSIM is a visiting plan on local networks, so the status bar shows the operator whose towers you are using. Seeing that name is a good sign: the line has found a network.
Which line is your travel eSIM?
Most data faults that reach support start here. A travel line rarely carries the name of the shop or the destination, so it is easy to set the wrong one.
A SimbaSIM line may announce itself as “Plus” at install, the network its eSIMs are registered on. After that it is unnamed and labelled something like “Mobile Data” or “Secondary” until you rename it. iOS also uses labels such as “Business” and “Personal”. Your own line shows your phone number, and it is the one your calls and texts arrive on. A SimbaSIM line has no number. If you have three lines and do not recognise one, the newest is the travel eSIM.
Rename it now so you cannot mix them up: on iPhone, Settings, Mobile Service, tap the line, then Mobile Plan Label. iPhone dual SIM covers the labels in more detail, and how dual SIM works with an eSIM explains how two lines share one phone.
Is your data going out on the right line?
A phone uses one line for mobile data at a time. Apple puts it plainly: one number at a time can use cellular data. If that is still your home line, the travel line can show full bars and carry nothing.
Point Mobile Data at the travel line
- iPhone: Settings, Mobile Service, Mobile Data, then tap the travel line.
- Samsung Galaxy: Settings, Connections, SIM manager (SIM Card Manager on some models), Mobile data, then choose the travel SIM. You can also pull down the quick panel and tap Mobile data.
- Google Pixel: Settings, Network & internet, SIMs, then under your primary SIMs tap Mobile data and choose the travel SIM. Google notes only one SIM can be the default for data.
Turn off Allow Mobile Data Switching
On iPhone, Allow Mobile Data Switching lets the phone use your other line for data. Abroad your other line is the roaming one, so turn the switch off for the trip: Settings, Mobile Service, Mobile Data, then turn off Allow Mobile Data Switching. On a Pixel, the matching switch is Automatic data switching under Settings, Network & internet, SIMs.
Turn on Data Roaming for the travel line
The travel eSIM is a visiting plan on a local network, so to your phone it is roaming, and with Data Roaming off the line will not carry data. The switch is set line by line, so turning it on for the travel line cannot put anything on your home bill.
- iPhone: Settings, Mobile Service, tap the travel line, then Data Roaming (on some versions under Mobile Data Options).
- Samsung Galaxy: Settings, Connections, Mobile networks, Data roaming.
- Google Pixel: Settings, Network & internet, SIMs, tap the travel SIM, then Roaming.
Is the phone on a network your plan can use?
Not every network in a country accepts every travel eSIM. On automatic selection a phone can keep choosing a network that shows bars but will not carry the plan’s data. The fix is to pick one by hand.
Each destination page lists the networks its plan can use: open the page for your country, such as Brazil or France, and note the names. Then choose one of those.
Manual network selection on iPhone
- Settings, Mobile Service, then tap the travel line.
- Tap Network Selection.
- Turn off Automatic and wait while the list loads.
- Tap a network from the plan’s list. Give it a minute, then try a page.
The choice applies only to the line you picked, so your own line is untouched.
Manual network selection on Samsung Galaxy
- Settings, Connections, Mobile networks, then Network operators. With two SIMs, choose the travel SIM.
- Turn off Select automatically and wait while the phone searches.
- Pick a network from the plan’s list.
Manual network selection on Google Pixel
- Settings, Network & internet, SIMs, then tap the travel SIM.
- Turn off Automatically select network and wait while the phone scans.
- Pick a network from the plan’s list.
Switch back to automatic when you move on
A phone set to one network by hand stays on it. Vodafone’s guides warn that with a network chosen manually, the phone loses its connection once that network is out of reach. When you travel on, or the next morning, turn automatic selection back on.
Bars but only “E” or 2G: forcing 4G or 5G
An “E”, “G” or “2G” next to the bars means the phone is on an older network, too slow for maps or messaging apps to do much. Operators are retiring the old networks unevenly: by June 2026 the GSA counted 102 operators that had completed a 3G switch-off, but only 27 that had retired both 2G and 3G. Where 4G is out of reach, or the network you are on is not offering the travel line 4G, the phone can drop to 2G.
What to do:
- Check the line is allowed 4G or 5G. On iPhone, Settings, Mobile Service, tap the travel line, then Mobile Data Options. Apple puts the choice of network type for voice and data here; turn on Enable LTE, or choose an LTE or 5G option rather than 3G. On a Pixel, Settings, Network & internet, SIMs, tap the travel SIM, Preferred network type, and choose 5G or LTE rather than 3G or 2G.
- Choose a different network by hand, from the plan’s list, as above. If one network keeps giving you 2G, another may give you 4G in the same spot.
- Move. Indoors, underground and in valleys, 4G may not reach and the phone falls back to what does.
No data after crossing a border
On a regional plan you should not need to change anything at a border: the phone leaves one country’s network and joins one in the next. When it does not:
- Switch network selection back to Automatic if you set it by hand. A network you chose in the last country is now out of reach, and the phone will not look for another on its own.
- Turn Airplane Mode on for at least 15 seconds, then off. Apple suggests this for “No Service”, and it makes the phone search afresh.
- Check the new country is on your plan. The Europe plan page lists its countries. A plan for one country stops at that country’s border.
- Check Mobile Data is still on the travel line, and that Allow Mobile Data Switching is still off on iPhone.
Using your phone in Europe covers ferries, borders and where “Europe” stops for your phone.
Settings on the phone that block data
If the line, the roaming switch and the network are right, something on the phone may be holding data back.
- Low Data Mode (iPhone). Apple says it restricts background network use. With two lines, it is set per line: Settings, Mobile Service, tap the travel line, then turn off Low Data Mode.
- Mobile data for one app (iPhone). Settings, Mobile Service, then scroll to the list of apps. Apple notes an app switched off there uses only Wi-Fi. If one app fails and others work, look here.
- Data Saver (Pixel and Samsung). Google says Data Saver lets most apps use background data only over Wi-Fi. On a Pixel: Settings, Network & internet, Data Saver. On Samsung: Settings, Connections, Data usage, Data saver. Samsung also lets you set an app to Wi-Fi only under Data usage, Allowed networks for apps.
- A VPN. If a VPN app is on, turn it off and try again. If pages load without it, the VPN is the problem, not the eSIM.
- Mobile data itself. On a Pixel, Google’s own first check is that the Mobile data switch is on and that Use SIM is on for the line.
Then restart the phone. Apple lists a restart straight after Airplane Mode in its own steps.
Slow rather than dead
If pages load, however slowly, the eSIM works and the settings are right. Speeds vary with the local network, coverage and your device. Indoors, underground and in crowds, any network slows down. Move nearer a window or outside, or pick a different network from the plan’s list.
On SimbaSIM plans, data never stops, but speeds may be reduced after very heavy use in a day and return to full speed the next day.
When to stop and contact us
Contact support once you have done the checks above, rather than trying the same thing for an hour. If you bought from SimbaSIM, ask in the support chat on any page. Send the email you bought with, your phone model, where you are, what the travel line shows (the network name, “E”, “SOS” or “No Service”), and a screenshot of the Mobile Service screen (iPhone) or SIM manager (Android).
Support can see whether the network has seen your eSIM, which tells them quickly whether it is a setting on the phone or a fault. Do not delete the eSIM while you wait: once deleted, it cannot be put back from the same code. If a SimbaSIM eSIM installs and never registers on a network at your destination, you get a full refund, as set out in our refund policy.
For the rest of the troubleshooting set, see eSIM troubleshooting, and the install guide for the taps at install.
Questions
Why does my phone show a local network’s name and not the company I bought the eSIM from?
Because you are using that operator’s towers. A travel eSIM is a visiting plan on local networks, so the status bar names the network you are on, not the seller.
Will turning on Data Roaming for the travel eSIM put charges on my home bill?
No. Data Roaming is set line by line, so turning it on for the travel line changes nothing on your own line. Leave it off on your home number for the trip.
Should I reset network settings?
Not as a first step. A reset does not change which line carries data or which network the phone picks, and those are the usual causes. Work through the checks on this page first.
Should I delete the eSIM and install it again?
No. Once deleted, an eSIM cannot be put back from the same code, and you need a new one from the seller. Turn the line off instead if you want it out of the way.
Do I need to change the APN?
Not unless the seller tells you to. The fixes on this page cover the usual causes of bars with no internet.
Sources
- If you see SOS, No Service, or Searching on your iPhone or iPad (Apple Support)support.apple.com
- Using Dual SIM with an eSIM (Apple Support)support.apple.com
- Use cellular data on your iPhone or iPad (Apple Support)support.apple.com
- Use Low Data Mode on your iPhone and iPad (Apple Support)support.apple.com
- Manually selecting a cellular network on iPhone (AT&T Device Support)att.com
- How to manually select a mobile network (Samsung UK)samsung.com
- How to use dual SIM cards on your Samsung phone (Samsung UK)samsung.com
- Manage data usage on your Galaxy phone (Samsung US)samsung.com
- Samsung Galaxy S25: select network (Vodafone UK device guides)deviceguides.vodafone.co.uk
- How to use dual SIMs on your Google Pixel phone (Pixel Phone Help)support.google.com
- Fix mobile connectivity issues (Pixel Phone Help)support.google.com
- Use less mobile data with Data Saver (Pixel Phone Help)support.google.com
- Google Pixel 10: selecting network (EE device guides)deviceguides.ee.co.uk
- 2G and 3G switch-off, August 2026 (GSA)gsacom.com
Checked against these sources on 9 November 2026. Seen something out of date? Tell us at support@simbasim.com.
Keep reading

SOS or SOS only on your iPhone: what it means and how to fix it
SOS on an iPhone means no connection to your own carrier, but emergency calls still work. Why it happens at home and abroad, and the fixes, in order.

No “Add eSIM” option? Check if your phone can take an eSIM
Where Add eSIM appears on iPhone, Samsung and Pixel, why it can be missing, how regional models and carrier locks block it, and what to do if you have paid.

Deleted your eSIM, or “This code is no longer valid”? What to do
Why a travel eSIM says “This code is no longer valid”, how to check it is not already on your phone, and how to get a working replacement if you deleted it.
Ready for your next trip?
Get your eSIM in 60 seconds. Truly unlimited data, starting when you first connect at your destination.

130+ destinations
3 days
unlimited dataOne payment. No subscription.
- Hotspot included
- 24/7 support
Won’t install or connect?
