eSIM stuck on “Activating” or no data abroad: how to fix it

Why a travel eSIM says Activating, No Service or has bars but no data, and the fixes in order: Data Roaming, the data line, data switching. iPhone and Android.

Updated 9 sources

The bridge to Kansai Airport across Osaka Bay at dusk, its lights reflected in calm water, a plane high in the sky.

In short

  • Before you land, Activating or No Service on a travel eSIM is normal: the line only connects at the destination. Do not delete it or rescan the code.
  • After landing, turn on Data Roaming for the travel line first. It is set line by line, so it cannot add roaming charges to your home number.
  • Then set Mobile Data to the travel line, not your home line. A phone uses one line for data at a time.
  • Turn off Allow Mobile Data Switching on iPhone, or Automatic data switching on a Pixel, so data cannot slip back onto your home line.
  • Still nothing? Check the line is turned on, toggle Airplane Mode for 15 seconds, restart, then choose a network by hand.
  • If a travel eSIM installs and never connects at the destination, it is not a setting you can fix. Contact the seller.
Contents 12 sections
  1. Still at home? “Activating” or “No Service” before you land is normal
  2. Fix 1: Turn on Data Roaming for the travel eSIM (and why it can’t charge your home bill)
  3. Fix 2: Point mobile data at the travel eSIM, not your home line
  4. Fix 3: Turn off “Allow Mobile Data Switching” (iPhone) or automatic data switching (Android)
  5. Is the travel line actually turned on? Finding it when it’s called “Plus”, “Secondary” or “Mobile Data”
  6. Still nothing: airplane mode, restart, and choosing a network by hand
  7. What each message means: Activating, No Service, SOS, bars but no internet
  8. Signal but slow, not no signal
  9. When it isn’t your phone: a carrier-locked phone, a deleted eSIM, a network fault
  10. What to send support so they can fix it fast, and what you get back if it never worked
  11. Questions
  12. Sources

A travel eSIM that says “Activating”, “No Service” or has bars but no data after you land nearly always has Data Roaming turned off for the travel line. Turn it on first, then set Mobile Data to the travel line and turn off automatic data switching. Before you land, “Activating” is normal: the line only connects at the destination.

Work down this page in order. The first three fixes solve most cases, and the steps for iPhone, Samsung and Pixel sit side by side under each one. If you are not sure which line is the travel eSIM, read the section on finding it, further down, first.

Still at home? “Activating” or “No Service” before you land is normal

A travel eSIM is a plan for the place you are going. It registers on a network there, not at home, so until you arrive it will sit on “Activating”, “No Service” or “Searching”. Nothing is wrong, and with a plan whose days start on first use, as SimbaSIM’s do, nothing has been used up.

Two things not to do while you wait:

  • Do not delete the eSIM. Apple’s advice is not to erase an eSIM as a troubleshooting step unless your provider tells you to, because once it is erased you need a new one. The activation code is spent by the first download.
  • Do not rescan the QR code. If the line is listed on your phone, the install worked. Scanning again will only tell you the code has already been used.

Leave the line where it is and do the three fixes below when you land.

Fix 1: Turn on Data Roaming for the travel eSIM (and why it can’t charge your home bill)

A travel eSIM connects as a visiting plan on a local network, so to your phone it is roaming. With Data Roaming off for that line, the phone will not let it carry data, and the line stays on “Activating” or “No Service”. This is the first thing to check, every time.

Turn it on for the travel line only:

  • iPhone: Settings, Mobile Service (Cellular in the US), tap the travel line, then turn on Data Roaming. On some iOS versions it sits one level down, under Mobile Data Options.
  • Samsung Galaxy: Settings, Connections, Mobile networks, then turn on Data roaming. If the switch is greyed out, Samsung says to check mobile data is turned on first.
  • Google Pixel: Settings, Network & internet, SIMs, tap the travel SIM, then turn on Roaming.

Why this cannot put charges on your home bill: on a phone with two lines, Data Roaming is set separately for each line. Apple’s steps have you choose the line before you change it. Turning it on for the travel line changes nothing on your own line, so leave Data Roaming off on your home number for the trip.

Fix 2: Point mobile data at the travel eSIM, not your home line

A phone uses one line for mobile data at a time. If that is still your home line, you have either no data or your home carrier’s roaming data, and the travel line sits idle however good its signal.

  • iPhone: Settings, Mobile Service, Mobile Data, then choose the travel line.
  • Samsung Galaxy: Settings, Connections, SIM manager (SIM Card Manager on some models), Mobile data, then choose the travel SIM. You can also pull down the quick panel and tap Mobile data.
  • Google Pixel: Settings, Network & internet, SIMs, then under your primary SIMs tap Mobile data and choose the travel SIM.

Keep your own number as the line for calls and texts. A data-only travel eSIM has no number, and your bank’s text codes still arrive on your own line.

Fix 3: Turn off “Allow Mobile Data Switching” (iPhone) or automatic data switching (Android)

Apple describes Allow Mobile Data Switching as letting the iPhone use mobile data from both plans, depending on coverage and availability. At home that is harmless. Abroad your home line is the roaming one, so any data the phone moves onto it is charged at your home carrier’s roaming rate. Of all the settings on this page, it is the one that can cost more than the trip.

  • iPhone: Settings, Mobile Service, Mobile Data, then turn off Allow Mobile Data Switching.
  • Google Pixel: Settings, Network & internet, SIMs, then turn off Automatic data switching.
  • Samsung Galaxy: Samsung’s support pages do not document a single switch for this, and the name varies by model. If SIM manager shows a data switching option, turn it off for the trip.

Is the travel line actually turned on? Finding it when it’s called “Plus”, “Secondary” or “Mobile Data”

A travel eSIM rarely shows the name of the shop you bought it from, or the country. Look for a line you do not recognise. A SimbaSIM line can show as “Plus”, the network its eSIMs are registered on, or as “Mobile Data”, “Secondary” or another unnamed line. Once it connects, the status bar shows the local network’s name, because those are the towers you are using. The line with your own number is the one your calls and texts arrive on; the other one is the travel eSIM.

Then check it is switched on:

  • iPhone: Settings, Mobile Service, tap the travel line. If you see Turn On This Line, tap it. Apple lists this check in its own No Service steps.
  • Samsung Galaxy: Settings, Connections, SIM manager, tap the travel SIM and turn its switch on.
  • Google Pixel: Settings, Network & internet, SIMs, tap the travel SIM and turn on Use SIM.

If your iPhone said “Choose a cellular plan to turn off”

That message, shown at install, means the eSIM installed correctly. An iPhone keeps two lines active at a time and you already had two, perhaps an old travel eSIM or a work line. Keep the line with your own number on, and turn off the other old line for the trip so the travel eSIM can be active. Turning a line off deletes nothing.

Still nothing: airplane mode, restart, and choosing a network by hand

If the three fixes are done and the line is on, make the phone search for networks afresh. Do these in order and give each a minute or two:

  1. Airplane Mode. Apple’s advice for No Service is to turn Airplane Mode on for at least 15 seconds, then off again.
  2. Restart the phone. Apple lists this next.
  3. Choose a network by hand. On iPhone: Settings, Mobile Service, tap the travel line, Network Selection, turn off Automatic, then pick a network from the list. On Android, look in the travel SIM’s own settings for automatic network selection; the name varies by phone. Turn it off and pick a network. Each destination page, such as Japan, names the networks its plan can use, so pick one of those. Turn automatic selection back on afterwards.

Apple also suggests checking for a carrier settings update under Settings, General, About while you are on Wi-Fi.

What each message means: Activating, No Service, SOS, bars but no internet

What you see on the travel line What it usually means What to do
Activating, before you land The plan has not reached its destination yet Nothing. Wait until you arrive
Activating, after you land Data Roaming is off for the travel line Fix 1
No Service or Searching The line is not connected to any network Fix 1, check the line is on, then Airplane Mode and restart
SOS or SOS only Not connected to a network, but emergency calls can go through other networks (Apple shows this in Australia, Canada and the US) Fix 1, then pick a network by hand
Bars, but nothing loads Mobile data is on your home line, or data switching moved it back Fix 2 and Fix 3
Bars and data, but slow You are connected; the network or the spot is the issue See the next section

Signal but slow, not no signal

If pages load, however slowly, the eSIM is working and the settings are right. What is left is the network and where you are standing. Indoors, underground and in crowded places such as stadiums and stations, any network slows down.

Things worth trying:

  • Move nearer a window or outside, and try again.
  • Choose a different network by hand, as above, from the ones the plan can use at your destination.
  • Turn Airplane Mode on and off to make the phone reconnect.

Check, too, that the data you are using is actually coming through the travel line: if Fix 2 or Fix 3 was missed, you may be on your home carrier’s roaming data.

When it isn’t your phone: a carrier-locked phone, a deleted eSIM, a network fault

Some faults cannot be fixed in settings.

  • A carrier-locked phone. A phone locked to your home network will not accept another company’s eSIM, and the usual sign is that it will not install at all. On iPhone, Settings, General, About should say “No SIM restrictions”. How to check if your phone is unlocked covers iPhone and Android, and only your carrier can unlock it.
  • A deleted eSIM. Once deleted, the eSIM cannot be put back from the same code. The seller has to issue a new one.
  • A line that installed but never connects. If you have done every fix on this page at the destination and the line has never connected, the fault is not something you can change. Contact the seller.

What to send support so they can fix it fast, and what you get back if it never worked

If you bought from SimbaSIM, ask in the support chat on any page or email support@simbasim.com. Send:

  1. The email address you bought with.
  2. The phone model, and where you are.
  3. What the travel line says: Activating, No Service, SOS, or bars with no data.
  4. Which fixes you have already done, especially Data Roaming on the travel line and Mobile Data pointed at it.
  5. A screenshot of the Mobile Service screen (iPhone) or SIM manager (Android), if you can.

Support can see whether the network has ever seen your eSIM, which tells them quickly whether it is a setting or a fault. If a SimbaSIM eSIM will not install, or installs and never registers on a network at your destination, you get a full refund, as set out in our refund policy.

For the rest of the setup, How to set up a travel eSIM on iPhone walks through install and landing, the install guide has the Android taps, and eSIM troubleshooting covers eSIMs that will not install. Check your model on the device page.

Questions

How long should an eSIM take to activate after landing?

There is no fixed wait. With Data Roaming on for the travel line and Mobile Data pointed at it, it should connect once the phone finds a network. If it has not, work through the fixes on this page in order rather than waiting, and if it still fails after twenty minutes on the ground, contact the seller.

Will turning on Data Roaming for the eSIM cost me money?

Not on your home bill. Data Roaming is set separately for each line, so turning it on for the travel line affects only the travel plan. Leave it off on your own line.

Should I delete the eSIM and scan the QR code again?

No. Apple’s advice is not to erase an eSIM as a troubleshooting step unless the provider tells you to, because once it is erased you need a new eSIM. The same code normally cannot be used twice.

Does the travel eSIM have to say the name of the company I bought it from?

No. A travel line is usually unnamed, and once connected the status bar shows the local network you are on, not the seller.

Do I need to change APN settings to fix no data?

Not as a first step. Work through Data Roaming, the data line and data switching first. Change APN or other network settings only if the seller’s own instructions tell you to.

Sources

  1. If you see SOS, No Service, or Searching on your iPhone or iPad (Apple Support)support.apple.com
  2. Using Dual SIM with an eSIM (Apple Support)support.apple.com
  3. About mobile data roaming options for your iPhone and iPad (Apple Support UK)support.apple.com
  4. How to erase an eSIM on your iPhone or iPad (Apple Support)support.apple.com
  5. How to use dual SIMs on your Google Pixel phone (Pixel Phone Help)support.google.com
  6. Google Pixel 10: turning data roaming on or off (EE device guides)deviceguides.ee.co.uk
  7. How do I turn international data roaming on or off on my Samsung Galaxy device? (Samsung UK)samsung.com
  8. How to use dual SIM cards on your Samsung phone (Samsung UK)samsung.com
  9. Manually selecting a cellular network on iPhone (AT&T Device Support)att.com

Checked against these sources on 2 November 2026. Seen something out of date? Tell us at support@simbasim.com.

Ready for your next trip?

Get your eSIM in 60 seconds. Truly unlimited data, starting when you first connect at your destination.

Simba the bear at a hilltop above the clouds at sunrise

130+ destinations

3 days

unlimited data
From$12.90
Choose destination

One payment. No subscription.

  • Hotspot included
  • 24/7 support

Won’t install or connect?

Your refund guarantee

  • 100% refund if your eSIM won’t install.
  • 100% refund if it never connects at your destination.
  • 100% refund or a swap if you picked the wrong destination and haven’t connected.
  • 100% refund for a confirmed fault on our side or the network’s that stops your eSIM working.

Used part of your plan? Unused days are refunded pro rata within 30 days of purchase, while the plan is still valid.

Request a refund within 30 days. Email your order reference and what happened to support@simbasim.com. Approved refunds return to your original payment method, usually within 5–10 business days.

Expired plans and deleted eSIM profiles aren’t refundable. Other policy exclusions apply. Full refund policy (opens in a new tab)