Deleted your eSIM, or “This code is no longer valid”? What to do
Why a travel eSIM says “This code is no longer valid”, how to check it is not already on your phone, and how to get a working replacement if you deleted it.

In short
- “This code is no longer valid” (iPhone) or “already in use” (Android) means the activation code has already been downloaded once. It is not a fault in the QR code.
- Most often the first attempt worked. Check every line under Settings, Mobile Service (or SIM manager on Android) before asking for a replacement.
- A travel eSIM rarely shows the shop’s name or the country. A SimbaSIM line shows as “Plus”, “Mobile Data”, “Secondary” or another unnamed line.
- Deleting an eSIM removes it from the phone for good, and the same QR code will not install it again. It does not cancel the plan you bought.
- If you deleted a SimbaSIM eSIM, contact support for a replacement. Scan only the newest email; the old code stays dead.
- If a brand-new code that you have never scanned also says no longer valid, stop retrying and tell support: a person needs to check it.
Contents 13 sections
- “This code is no longer valid”: what the message really means
- First, check: is the eSIM already on your phone?
- How to tell which line is your travel eSIM (it may not show the brand or the country)
- What happens if you delete an eSIM?
- Can you reinstall a deleted eSIM with the same QR code?
- How to get a replacement eSIM, and which email to scan
- When a brand-new code also says “no longer valid”
- What doesn’t cause this error (scanning from another screen is fine)
- Should you delete a travel eSIM after your trip? (No, and here’s why)
- Changing or resetting your phone without losing the eSIM
- Deleted eSIM: quick answers
- Questions
- Sources
“This code is no longer valid” on an iPhone, or “already in use” on Android, means the eSIM’s activation code has already been downloaded once, and each code works only once. Most often that first download worked and the eSIM is already on your phone, so look for it before you do anything else. If you did delete it, the same QR code cannot bring it back: the seller has to send you a new one.
The check takes a minute, and it is the first thing on this page.
“This code is no longer valid”: what the message really means
An eSIM arrives as an activation code, usually shown as a QR code. When your phone scans it, it downloads the eSIM profile from the network, and that download uses the code up. Cradlepoint’s eSIM documentation puts it plainly: once a profile has downloaded, the code is consumed and cannot be reused. A few home carriers, Verizon among them, allow the same code to be used again on the same phone, but travel eSIMs, SimbaSIM’s included, work the single-use way.
So when a code says it is no longer valid, there are three usual stories, in this order of likelihood:
- The first scan worked. The phone looked as if it had failed, or you were not sure, so you scanned again. The second scan is the one that is refused.
- The eSIM was deleted. It was installed, then removed, perhaps while tidying up the SIM list or trying to start again. The code was spent by the first download and will not install it a second time.
- You are scanning an old email. If a replacement has already been sent, the first code stays dead. Only the newest one works.
First, check: is the eSIM already on your phone?
Before you ask anyone for a replacement, list every line on the phone.
- iPhone: Settings, then Mobile Service (Cellular in US English). Every line is listed there, with the line that carries your number among them.
- Samsung Galaxy: Settings, Connections, SIM manager (SIM card manager on some models).
- Google Pixel: Settings, Network & internet, then SIMs.
Count the lines. If there is one more than you expect, or one you do not recognise, that is almost certainly the travel eSIM, and the install worked. Do not delete it and do not scan the code again. Leave it where it is: a travel eSIM only connects at its destination, so before you land “No Service” or “Activating” on that line is normal. eSIM stuck on “Activating” explains what to do once you arrive.
If you find nothing new, the eSIM is not on the phone. Go to the section on getting a replacement below.
How to tell which line is your travel eSIM (it may not show the brand or the country)
A travel eSIM rarely carries the name of the shop you bought it from, and it does not name the country either. That is the most common reason people think an eSIM has vanished when it has not.
A SimbaSIM eSIM appears like this:
- At install, the profile announces itself as “Plus”, the network its eSIMs are registered on.
- Once added, the line is labelled “Mobile Data”, or on some phones “Secondary” or another unnamed label, until you rename it.
- After you land, the status bar shows the local network’s name, because those are the towers you are using.
The line with your own number is the one your calls and texts arrive on. Any other line you did not set up yourself is the travel eSIM.
Rename the line so you find it next time
Give the line a name now, while you know which one it is. Pick a name that will not go out of date, such as “Travel”. The same eSIM stays on your phone and is used again for your next trip, so naming it after this trip’s country will be wrong next time.
- iPhone: Settings, Mobile Service, tap the line, then the plan label (Apple’s steps call it Cellular Plan Label), and choose a label or type your own.
- Samsung Galaxy: Settings, Connections, SIM manager, tap the SIM, then Name. Samsung also lets you change its icon there.
- Google Pixel: Settings, Network & internet, SIMs, then tap the SIM to see its options.
What happens if you delete an eSIM?
Deleting an eSIM removes the profile from your phone, and that profile cannot be downloaded again from the same code. Apple’s advice is not to erase an eSIM as a troubleshooting step unless your provider tells you to, because once it is erased you need a new eSIM from the provider.
What deleting does not do:
- It does not cancel the plan. Apple notes that cancelling a plan is something you arrange with the provider, not something the phone does.
- It does not refund it. With SimbaSIM, a deleted eSIM is replaced rather than refunded, so the plan you bought is not lost.
- It does not touch your own number. Your home SIM and its line carry on as before.
If you only want the line out of the way, turn it off instead of deleting it. On iPhone, tap the line under Mobile Service and turn off Turn On This Line; on a Pixel, tap the SIM and turn off Use this SIM. Turning a line off deletes nothing, and you can turn it back on whenever you like.
How to delete an eSIM, if you really mean to
- iPhone: Settings, Mobile Service, tap the line, then Delete Plan. With only one plan on the phone, the button is Delete eSIM.
- Google Pixel: Settings, Network & internet, Mobile network (SIMs on newer versions), choose the eSIM, then Erase eSIM.
Read the next sections first. With a travel eSIM, deleting is rarely the right move.
Can you reinstall a deleted eSIM with the same QR code?
No. The code was used up by the first download, so scanning it again gives you “This code is no longer valid” or “already in use”, however many times you try. Retrying does no harm, but it will not work, and it can make you think the replacement is broken too.
How to get a replacement eSIM, and which email to scan
If you bought from SimbaSIM:
- Ask in the support chat on any page of this site, or email support@simbasim.com.
- Say you deleted the eSIM, and give the email address you bought with. Add the order reference from your confirmation email if you have it.
- Wait for the new email. The replacement arrives as a new QR code by email.
- Scan the newest email only. The old code stays dead. If you have several emails from us, check the date before you scan.
- Install it as before, on Wi-Fi. The install guide has the steps for iPhone and Android, and How to set up a travel eSIM on iPhone and on Android walk through each screen.
Then rename the new line, as above, so it does not get deleted by mistake again.
If you bought from another company, the route is the same in outline: the seller has to issue a new code. Apple’s own wording is that if you erase an eSIM, you need to contact your carrier to get a new one.
When a brand-new code also says “no longer valid”
Sometimes a replacement code that you have never scanned before gives the same message on its first scan. When that happens, stop. Do not keep retrying, and do not ask for a third code.
Two dead codes in a row is not something you can fix from the phone. It is either a fault on our side or a phone locked to its carrier, and a person at SimbaSIM checks it. Tell support that the new code failed on its first scan.
While you wait, check the lock. On iPhone, Settings, General, About should say “No SIM restrictions” next to Carrier Lock. How to check if your phone is unlocked covers iPhone and Android, and only your carrier can remove a lock. Whether your model takes an eSIM at all is on the device page.
What doesn’t cause this error (scanning from another screen is fine)
Scanning the QR code from a laptop, a tablet or another phone’s screen is the normal way to install an eSIM. Apple’s own steps are to open the Camera app and scan the code. It never causes “This code is no longer valid”.
Other things that do not cause it:
- Being at home rather than at your destination. A travel eSIM installs anywhere with Wi-Fi; it connects later.
- Opening the email on a different device. Where you read the email makes no difference to the code.
- Taking a screenshot of the QR code. A screenshot holds the same code; it is still single-use.
Should you delete a travel eSIM after your trip? (No, and here’s why)
No. Turn it off instead.
A SimbaSIM eSIM stays on your phone between trips. When you travel again, you buy another plan with the same email address and it goes onto the eSIM already on your phone: nothing to install and no new QR code. Keeping it costs nothing, and the eSIM does not expire. Delete it, and next time you need a replacement before you can use your new plan.
On iOS 26 and later, Apple says your iPhone turns off a travel eSIM automatically when you return home. If it does not, turn the travel line off yourself and check your own line is on. To plan the next trip, start from your destination’s page, such as Japan, or from Choose a plan.
Changing or resetting your phone without losing the eSIM
Resetting your phone
On iPhone, Apple says that when you erase all content and settings you can choose to erase your eSIM or keep it. Choose to keep it. On other phones, read each screen of the reset before you confirm; if it offers to keep eSIMs, keep them.
Moving to a new phone
Apple’s eSIM Quick Transfer moves a plan from one iPhone to another, but only if the carrier supports it, and when the plan activates on the new phone it switches off the old one. A SimbaSIM eSIM cannot be moved between phones that way. Contact support before you change phones: if the eSIM has not been installed yet, it can be reissued for the new phone, and if it has, support will sort out what to do.
Deleted eSIM: quick answers
The short questions are below. If your eSIM is installed but will not connect, eSIM troubleshooting has the checks in order, and our refund policy sets out when a plan that never worked is refunded.
Questions
Can I get a deleted eSIM back without contacting anyone?
Not with most travel eSIMs. The activation code was spent by the first download, so the phone has nothing to reinstall from. The seller has to issue a new one. A few home carriers can send the same profile again, but that is their own arrangement, not something the phone does.
Does deleting my eSIM get me a refund?
No. Deleting removes the eSIM from your phone, but it does not cancel or refund the plan. With SimbaSIM, a deleted eSIM is replaced rather than refunded, so the plan you bought is not lost.
Will the new eSIM have the same phone number?
A SimbaSIM eSIM carries data only and has no phone number, so there is nothing to keep. Your own number stays on your own SIM.
Does the error mean my phone does not support eSIM?
No. A phone that cannot take an eSIM fails earlier, usually with no option to add one or a message that the SIM is not supported. “No longer valid” means the code had already been used.
Can I delete an eSIM I have finished with on Android?
Yes. On a Pixel, Google’s steps are Settings, Network & internet, Mobile network, then the eSIM, then Erase eSIM. If you might travel with it again, turn off Use this SIM instead, which deletes nothing.
Sources
- How to erase an eSIM on your iPhone or iPad (Apple Support)support.apple.com
- About eSIM activation code usage (Cradlepoint documentation)docs.cradlepoint.com
- Using Dual SIM with an eSIM (Apple Support)support.apple.com
- Set up eSIM on iPhone (Apple Support)support.apple.com
- Use eSIM while traveling internationally with your iPhone (Apple Support)support.apple.com
- How to use dual SIMs on your Google Pixel phone (Pixel Phone Help)support.google.com
- How to use dual SIM cards on your Samsung phone (Samsung UK)samsung.com
Checked against these sources on 5 November 2026. Seen something out of date? Tell us at support@simbasim.com.
Keep reading

SOS or SOS only on your iPhone: what it means and how to fix it
SOS on an iPhone means no connection to your own carrier, but emergency calls still work. Why it happens at home and abroad, and the fixes, in order.

Travel eSIM shows signal but no internet: how to fix it
Your travel eSIM shows a local network and bars, but nothing loads. Check which line carries data, the network it is on, and 4G, on iPhone, Samsung and Pixel.

No “Add eSIM” option? Check if your phone can take an eSIM
Where Add eSIM appears on iPhone, Samsung and Pixel, why it can be missing, how regional models and carrier locks block it, and what to do if you have paid.
Ready for your next trip?
Get your eSIM in 60 seconds. Truly unlimited data, starting when you first connect at your destination.

130+ destinations
3 days
unlimited dataOne payment. No subscription.
- Hotspot included
- 24/7 support
Won’t install or connect?
